Gigabit Managed Traffic/ITS Ethernet Switch

Overview

The SICOM3170 Traffic/ITS Ethernet switch packs a powerful set of features into an industry-standard 4-channel vehicle detector form factor. This “Green Ethernet” switch uses an astonishingly low eight watts or less, allowing it to be hot-plugged into any CalTrans input file (or NEMA TS 1/TS 2 detector rack) for rapid and reliable field deployment.

Quick installation in the input file/detector rack eliminates the unreliability of external power supplies, the problem of finding filtered AC power within the cabinet, and the difficulty of a clean physical installation in today’s crowded traffic cabinets.

As the premier unit in the Traffic/ITS line of products, the fully
managed SICOM3170 is perfect for the deployment of video
surveillance, controller communications, DMS signs, and other
Traffic/ITS applications.

 

Features

• 2 Gigabit SFP fiber Uplink ports, 1 RJ45 10/100/1000Mbps port, and 7 RJ45 10/100Mbps ports.
• Ultra low power consumption, the SICOM3170 uses less than
  8 Watts of power under fully loaded conditions.
• Supports IGMP Snooping, Port Mirroring, QoS, VLAN.
• Supports TACACS+, Radius, SSH/SSL and improves Network
  Security functions.
• Supports Rapid Spanning Tree (RSTP/STP IEEE802.1w/d) and
  DT-Ring/DT-Ring+ (Self healing rings with a recovery time
  of <50ms).
• Supports Automatic Network Topology Discovery and Generation
  with Kyvision3.0 centralized management.
• Supports CLI, TELNET, WEB, SNMP v1/v2/v3 and OPC management control.
• SICOM series uniform Kyvision3.0 management software.
• Secure MAC and port binding function, supports static FDB.
• Port rate bandwidth limiting.
• Enhanced Broadcast Storm Control.
• EMC industrial level 4, able to work in harsh environments.
• Easy installation (slide it into the detector rack/input file chassis
  and it immediately powers up).
• Compatible with the interface requirements in the CalTrans TEES
  (170/332) specification.
• Aluminum case with fanless design (convection cooled).
• IP40 protection class.

 

Technical Specifications

Standards
IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3z, IEEE802.3ab, IEEE802.1q, IEEE802.1p, IEEE802.1d, IEEE802.1w
Store and forward switching mode

Topologies
- Supports Ring, Link, Daisy-Chain (drop and repeat), star, and Tangent Ring network topologies.

Interface
(2) Gigabit SFP ports, 1000Base-SX/LX/LH/ZX modules with LC connector can be selectable.
(1) 10/100/1000Mbps RJ45 port.
(7) 10/100Mbps RJ45 ports.
(1) RS232, RJ45 Console port.

Status Indicators
- Click to enlarge for details on the SICOM 3170 Status Indicators:

Performance
- MAC Address Table Size: 8K
- Backplane switching capacity: 9.6G

Power Requirements
- Power input: 9-36VDC (12VDC, 24VDC)
- Power consumption: Less than 8W power consumption in a
standard NEMA or CalTrans detector rack/input file.

Cable
- Twisted pair: 0-100m (Standard CAT5, CAT5e, CAT6, and CAT6a network cable).
- Multi-mode fiber: 1310nm, 0-2km (1000M).
- Single-mode fiber: 1310nm, 0-40km;1550nm, 0-80km.

Physical Characteristics
- Casing: IP40-rated aluminum housing with fanless design.
- Weight: 1.764 pound (800g).
- Dimensions: 2.28W”x4.49H”x8.07D” in. (58x114x205mm).
- Form Factor: Rail installation in CalTrans TEES (170/332) cabinet or NEMA TS 1/ TS 2 cabinet.

Environmental Limits
- Operating Temperature: -40 to 185°F (-40 to 85°C).
- Storage Temperature: -40 to 185°F (-40 to 85°C).
- Ambient Relative Humidity: 0 to 95% (non-condensing).

MTBF (Mean Time Between Failure)
35 years

Warranty
5 Years

Approvals
IEC61000-4-2(ESD): ±8KV contact discharge, ±15KV air discharge
IEC61000-4-3(RS): 10V/M (80-1000MHz)
IEC61000-4-4(EFT): ±4KV power line, ±2KV data line
IEC61000-4-5(Surge): power line ±4KV CM/ ±2KV DM, data line ±2KV IEC61000-4-6(CS):3V(10KHZ-150KHZ),10V(150KHz-80MHz)
IEC61000-4-8(Power frequency magnetic field):100A/m cont. 1000A/m, 1s to 3s
IEC61000-4-12/18(Damped oscillatory wave):2.5KV CM, 1KV DM
IEC61000-4-10(Damped oscillatory):30A/m
IEC61000-4-16(Common mode conduct):30V cont. 300V, 1s
FCC CFR47 Part 15/EN55022: Class A&B
IEC61000-6-2(Industrial Standards), IEC61850-3(Substations), IEEE1613(Electric Power Substations), EN50121-4(Railway Applications)

 

Ordering Information

Model:
SICOM3170-2GX-GE-7T

Description:
(2) Gigabit SFP Ports
(1) 10/100/1000Mbps Port
(7) 10/100Mbps Ports

Power:
Powered by plugging into a standard
detector rack/input file (12VDC, 24VDC)

Optional Gigabit SFP Modules
(uses non-proprietary SFP Optic Modules)

Model	Description
MM-GSFP-LX/LC-550	SFP module, 1 x 1000M Multi Mode, LC Connector, 1310nm, 550m
SM-GSFP-LX/LC-10	SFP module, 1 x 1000M Single Mode, LC Connector, 1310nm, 10km
SM-GSFP-LH/LC-40	SFP module, 1 x 1000M Single Mode, LC Connector, 1310nm, 40km
SM-GSFP-ZX/LC-60	SFP module, 1 x 1000M Single Mode, LC Connector, 1550nm, 60km
SM-GSFP-ZX/LC-80	SFP module, 1 x 1000M Single Mode, LC Connector, 1550nm, 80km